Glazing Bead Saw For PVC Profile

Glass presser saw is a tool for sawing glass presser, mainly used for plastic steel door and window glass presser 45 degree or 90 degree cutting and back presser foot cutting1.

Usage Scenario
The glazing saw is mainly used for the processing of plastic steel door and window glazing bars, ensuring that the bars are fitted precisely to the edges of the door or window and providing a solid fixing effect.

Operating method
When using the Glass Crimp Saw, you need to make sure that the angle and strength of the saw blade are appropriate to achieve a precise cut. This may include adjusting the angle of the blade, fixing the material, making the cut, etc.

Operating instructions for glass strip cutting saw:

1. Before starting up, first check and tighten the fasteners and pneumatic system pipe joints. Then connect the power and gas sources, turn on the machine and check if all mechanisms, electrical systems, and pneumatic systems are functioning properly. If there are any abnormalities, they should be eliminated.

2. Press the "Start" button on the motor, then press the "Start" button to start the motor. Listen for any abnormal sounds when the motor rotates and let it run empty once.

3. Firstly, align the ruler with the scale value of the tape measure according to the set length, then lock the guide ruler against the plate, cut the profile, measure the length of the cut profile, calculate the difference between the set length and the cutting length, and adjust the ruler.

4. Cut a piece of material and measure its angle and length. If there is a length error, adjust the guide ruler in a timely manner.

5. After completing the operation, press the "Motor Stop" button and then turn off the main power of the machine.

6. Drain the water from the triple water cup and blow off the foam with an air gun.

7. Turn off the main power and gas source.

Maintenance procedure:

1. Drain the air source processor every shift, clean it once a week, regularly check the pressure gauge, and adjust it to 0.4-0.6Mpa. Add oil to the oil mist device regularly, keeping the oil level at 1 drop per minute.

2,Check the connection and stability of each mechanism system, connect the air source, check the pneumatic system pipeline parts and their joints for air leakage, if there is any air leakage, be eliminated, check and adjust the ventilation pressure to the required air pressure.
3,Keep the pressure bar saw neat and clean, use a dry cloth to wipe off the dirt of each part.
4, should always check the technical situation of the saw blade, such as the need to replace, should cut off the power supply and air source, remove the rear guard, with a double-ended plate hand (46) to loosen the saw blade locking nut, replace the new saw blade.

Translated with DeepL.com (free version)

Hot Tags: glazing bead saw for pvc profile, China glazing bead saw for pvc profile manufacturers, suppliers, factory, UPVC Window Glazing Bead Saw, , upvc cutting machine